Filter
Top Products
15
light up. Release the reset button and the Power LED will begin
to flash, indicating the ICA-110/ICA-110W is changing to factory
reset. When factory reset is completed, the SSID is set as “NULL
String” (This default setting will let the ICA-110W connect to
ANY access point on the infrastructure network). The IP address
will also return to the default setting as 192.168.0.20.
4. I/O Connector
The camera provides the I/O connectors on the rear panel (pin 1/2
are for input, pin 3/4 are for output, pin 5/6 are for RS-485),
which provide the physical interface to send and receive digital
signals to a variety of external alarm devices.
5. DC Power Connector
The DC power input connector is located on the ICA-110/ICA-
110W’s rear panel, and is labeled 5VDC with a single jack socket
to supply power to the ICA-110/ICA-110W. Power will be
generated when the power supply is connected to a wall outlet.
Top/Bottom Panel
Top Panel