Filter
Top Products
25
5
USING THE CAMERA
You can access and manage the ICA-110/ICA-110W through: 1)
a web browser, and 2) the enclosed software IPView Pro. This
chapter describes the Web Configuration Utility, and provides the
instructions on using the camera with a web browser.
Web Configuration Utility
The ICA-110/ICA-110W must be configured through its built-in
Web-based Configuration. (Extensive knowledge of LAN will be
helpful in setting up the ICA-110/ICA-110W.)
From the web browser, enter the default IP address 192.168.0.20
in the Address bar and then press [Enter] to access the Welcome
screen of the Configuration Utility. The Welcome screen is
shown on the next page.
NOTE: The computer’s IP address must correspond with the
camera’s IP address in the same segment for the two devices
to communicate.