Rear and Bottom View (without the
Camera Stand)
3.
1.
2.
1. Screw Hole
The screw hole can be used to attach the camera stand or a tripod.
2. Reset Button
Press the button to reboot the camera; press and hold the button
for 5 second will reload the factory default settings for the camera.
The button works as the function in Web Configuration Utility
> Setting menu > Maintenance > Reboot or Factory reset.
14
When you perform a factory reset and try to re-login into the
camera, the default password is re-loaded as “admin.” Use the
factory default setting for password to login, and then the system
will ask you to change the password.