Filter
Top Products
Network setting > IP/Port setting
- IP address setting: This option allows you to select the IP
address mode and set up the related configuration.
DHCP
If your network uses the DHCP server, select this option.
According to this setting, the camera will be assigned an
IP address from the DHCP server automatically. Every
time when the camera starts up, please make sure that
the DHCP server is set to assign a static IP address to
your camera.
Static IP
You can select this option and enter the IP address
manually.
PPPoE
If your application requires a direct connection from an
ADSL modem through the camera’s RJ-45 LAN port,
select this option and enter the User ID and Password
into the respective boxes. (Note: You should have an
ISP PPPoE account.) The camera will get an IP address
from the ISP as starting up next time.
40