Filter
Top Products
System setting > User setting
- User authentication: When the option is enabled, you have
to enter the username and password in the login window to
access the camera. When the option is disabled, you can
directly access the camera as a Power user without entering
the username and password; however, once you try to access
the setup page, you will be asked to enter the administrator’s
username and password.
- User add/update: To add or modify a user, complete the
required settings in the following fields, including User
Name, Password, and Password (confirm). In addition, you
have to assign the user level as Power or Guest. The user
name and password is available between 4-8 characters.
The following table explains the user level:
Admin Fully control the camera by accessing the complete
configuration.
Power Allowed to use some simplified function of the camera, such
as using Zoom in/out, Buzzer, Flash led, adjusting the
46