Filter
Top Products
Setting up 17
7 Remove the diskette or CD-ROM from the drive.
8 If you have not already connected the DMC to the computer,
turn off the computer and connect the camera as described
on page 13.
9 Use the power switch (a) to turn the camera on.
Pwrswit.ai
10 Restart your computer.
11 Start DMC Direct and wait for the DMC window to appear,
verifying that the camera and computer are communicating.
dmcmabln.bm
Note: If an error message appears instead of the DMC
window, refer to Troubleshooting SCSI connection problems
on page 36 to correct the problem.
12 Proceed to Parfocalizing on page 24.