Filter
Top Products
24
Parfocalizing
After installing the camera on the microscope, parfocalize as
described below to assure that the eyepiece image and the
camera image are both in focus simultaneously.
Note: If you are using a 1:1 c-mount adapter, parfocalizing is
not necessary.
Parfocalize as follows:
1 Place a focusing target or specimen under the microscope.
2 Adjust the microscope lighting and focus to optimize the
image viewed through the eyepiece.
3 If a viewfinder image is not visible in the DMC Direct
window on your computer display, click the Preview button
in the main DMC Direct window.
4 Adjust the c-mount on the microscope until the target or
specimen image on the computer display is in focus. (Refer to
your microscope instructions for c-mount adjustment
instructions.)