Filter
Top Products
Connecting the Docking Station to Your Computer
The docking station provides a solid and convenient base for the ThermoView imager. The
docking station keeps the ThermoView imager available and connected to the computer or
workstation. In addition, it keeps the batteries charged and ready to go. The docking station
connects to your computer through its USB port. The USB cord should remain connected
to the computer at all times.
Hooking Up the Docking Station
x Connect the power adapter plug into the Docking Station’s power jack.
x Connect the power plug to a power outlet. (Depending on the power requirements in
your country you may need to use one of the several adapters provided that matches the
power plug to the local power outlet.)
Figure 17. The Docking Station
USB connector
Power adapter plug
USB communication cord
Power jack
x Find the USB port on your computer. Look for this symbol on your computer.
x Locate the USB communication cord permanently attached to the docking station. (The
USB communication cord is equipped with an USB connector.)
x Insert the USB connector on the cord to the USB port on your computer (see Figure
18).
July 1, 2003 - 31 - Version 1.0
i
i
Tel: (01943) 602001- WWW.ISSLTD.CO.UK - Fax: (01943) 816796