Filter
Top Products
51
Recording
30MIN T30 SP
1/4S
PAUSE
To Record Using Time Lapse
1. Use the SP•SLP/T20•30•40 switch to
set the tape speed to SP.
2. Place the POWER switch in CAMERA
to put the camcorder in record pause.
3. Press TIME LAPSE ANIM. REC/TIME
on remote to select the amount of
recording time (1/4, 1/2 or 1 second).
The recording time selected appears in
the viewfinder.
4. Press TIME LAPSE SELF INT./TIME
on remote to select the interval time
(15 seconds, 30 seconds, 1 minute or
5 minutes).
Time-Lapse Recording
Time-lapse recording makes automatic recordings at preset time intervals. The
recording will show subtle changes (such as shifts in cloud formations or plant growth)
when it remains focused on an object.
SP
1/4S 15S
PAUSE
5. Focus the camcorder on the subject
you want to record.
6. Press the thumb trigger (START/STOP
on the remote). The camcorder will
start and stop recording the selected
amount of time.
The tally light flashes with the flash
speed increasing five seconds before
recording begins.
7. When you are finished, press each
TIME LAPSE button during record
pause until and disappear
from the viewfinder.
If the camcorder is recording, first
press the thumb trigger (START/STOP
on the remote) to stop recording.
The interval time selected appears in
the viewfinder.