Filter
Top Products
65
Optional Accessories
Mounting the camcorder on a tripod,
such as AC088, will keep the camcorder
steady and produce excellent video
results.
This tripod’s fluid-effect head provides
smooth camera pan and tilt. The quick-
release mount makes it easy to attach or
remove the camcorder. The grooved,
tubular 3-section leg design folds down to
26" when not in use. Rubber feet allow
for sure footing.
Cautions: Before using a tripod, make sure it is
stable enough to hold the camcorder without
falling over. Do not transport the camcorder
attached to the tripod.
When attaching your camcorder to a tripod, be
careful not to force the tripod screw into the
camcorder’s tripod mounting hole.
The tripod screw should not protrude into the
camcorder more than approximately three-eighth
(3/8) inch. Forcing the screw could damage the
mounting hole on the bottom of the camcorder.
Using the Optional AC088 Tripod
All specifications and
descriptions of accessories are
subject to change without notice.
FB1260 and FB120 Rechargeable
Batteries
These rechargeable nickel-cadmium
batteries are designed specifically for long
life. The FB1260 powers your camcorder
approximately 60 minutes and the FB120
approximately 130 minutes (with video
light off – depending on how much you
use zoom and pause). Both can be
recharged with the AC adapter/charger
that came with your camcorder.
CPS91 AC Battery Charger
The CPS91 battery charger plugs directly
into an AC outlet and charges the FB1260
and FB120 camcorder batteries. Because
the CPS91 operates on 100-240 Volts,
50/60 Hz, it can be used virtually
anywhere in the world. A plug adapter
may be required in some countries.
Charging takes approximately seven hours
for the FB1260 (1-hour battery) and 13
hours for the FB120 (2-hour battery).
CHARGE
F1
F2
MODE
P
U
S
H
SCENE SELECT
A
U
T
O
M
A
N