RCA CC6384/CC6394 Camcorder User Manual


 
24 Chapter 1
Connections & Setup
Additional Notes about S-VHS and S-VHS ET Cassette Tapes
Use S-VHS tapes for storing recordings for an extended period or for recording
important scenes, as they enable higher-quality recording and playback.
With some tapes, better picture quality may not be obtained even with S-VHS
ET recording. It is recommended that you do a test recording beforehand to
ensure if better results can be obtained.
If the S-VHS ET mode or recording format is switched during recording, the
playback picture will be blurred at the switching point.
Noise may appear on-screen when tapes recorded in the SLP mode are played
back.
Tapes recorded in S-VHS or S-VHS ET mode can be played back not only on this
camcorder but also on a Super VHS VCR, an S-VHS ET VCR, or a VCR equipped
with the SQPB (S-VHS QUASI PLAYBACK) function.
When tapes recorded in S-VHS or S-VHS ET mode are played back on a VCR
equipped with the SQPB (S-VHS QUASI PLAYBACK) function, S-VHS picture
quality is not available.
Tapes recorded in S-VHS or S-VHS ET mode may not play back on some VCRs.
It is recommended to specifically label S-VHS ET recordings so you can easily
distinguish them from regular VHS recordings.
To avoid on-screen noise, do not perform Still Playback or Shuttle Search
repeatedly.
The S-VHS ET (extended technology) feature does not work with S-VHS tapes.