Filter
Top Products
Advanced Features
Chapter 6 79
Allows you to select the language (ENGLISH, FRENCH, or
SPANISH) of Instant Titles (see page 90).
Allows you to set the current date and time (see page 22).
Factory Preset: Demonstrates certain functions automatically.
When DEMO MODE is set to ON and you have exited all
menus, the demonstration starts.
Operating the Power zoom lever during the demonstration
stops the demonstration temporarily. If the Power zoom
lever is not moved for more than 1 minute after that, the
demonstration will resume.
To cancel the demo mode, rotate the Power switch to
M
(manual record) and press in the MENU dial while the demo
is in progress. This takes you directly to the DEMO MODE
menu (so you will not have to go through the main menu).
Rotate the MENU dial to highlight OFF. Then press in the
MENU dial again to select it.
Note: When a tape is loaded in the camcorder, the
demonstration is not available.
Automatic demonstration will not take place.
TITLE LANG*
DATE/TIME
DEMO MODE* ON
OFF
* Activated only when VIDEO is selected (the DSC indicator is not on). If DSC is
selected (the DSC indicator is on), this function will not be activated even though the
highlight bar on the menu will move to that position.
** Activated only when DSC is selected (the DSC indicator comes on). If VIDEO is
selected (the DSC indicator is not on), this function will not be activated even though
the highlight bar on the menu will move to that position.
Functions listed without */** are available when either DSC or VIDEO is selected.
*** S-VHS ET is displayed when a VHS tape is loaded, and S-VHS is displayed when an
S-VHS tape is loaded (see page 23). If a tape is not loaded, S-VHS appears.
S-VHS ET is preset to OFF.