Filter
Top Products
5
Understanding the Indicators
The scanner has the following indicators:
TH2H030E
1: Power On
2: Machine Busy
3: Document in Place
4: Error
When the scanner is in a normal operating state, the indicators will light in one of the combina-
tions shown below. If the indicators light in any other pattern, an error has occurred. Refer to p.
28, “Error Indicators and Solutions.”
Description
❍❍❍❍When the power has just been turned on, or the
Reset switch has been pressed (This combination
is displayed only for a few seconds.)
❍●●●When there is no document in the Auto Docu-
ment Feeder, and no document is being scanned
❍●❍●When there is a document in the Auto Document
Feeder, but the document is not being scanned
❍❍●●When scanned data is being transferred (and there
is no document in the ADF)
❍❍❍●When scanned data is being transferred (and there
is a document in the ADF)
❍●✕●When the scanner is ready for manual scanning
✕●●●When the scanner is ready by Low Power Mode
❍ :On
✕ : Flashing
● : Off
Guide to the Scanner
1
2
3
4