Filter
Top Products
5. Troubleshooting
28
Error Indicators and Solutions
When the indicators are on or flashing in any of the following combinations, an error has
occurred. After confirming the nature of the error, take the appropriate action.
Description of error
❍●● ❍The Auto Document Feeder
(ADF) or the ADF cover is
not closed properly.
❍●✕ ❍An original is jammed in
the Auto Document Feeder
(ADF).
❍●❍ ❍An original was not output
properly from the Auto
Document Feeder (ADF).
❍●✕ ✕There is a problem with the
operation of the document
table.
✕✕❍ ●The Endorser (printing
function) may have
malfunctioned.
✕✕✕ ✕System error
❍ :On
✕ : Flashing
● : Off
Action
Close the Auto Document
Feeder (ADF) or the ADF
cover.
Refer to P.29, “Procedures
to Correct Errors in the
ADF,” and remove the
jammed paper.
Refer to P.29, “Procedures
to Correct Errors in the
ADF,” and remove the paper
that was not output.
Refer to P.29, “Procedures
to Correct Errors in the
ADF” and open and close
the ADF cover.
Try opening and closing the
Auto Document Feeder
(ADF) several times. If the
same error occurs, contact a
service center.
Contact a service center.