Filter
Top Products
162
Changing Camera Settings
5
You can shoot still images with the time or date stamped onto the
picture.
The date/time setting on the Setup menu is explained here.
1
Display the Setup menu.
• For the operating procedure, see P.141.
2
Press the ADJ./OK button " to
select [Date Settings] and
press the button $.
3
Press the button !"#$ to set
the year, month, date and time.
• You can press and hold the button
!" to quickly raise or lower the
setting.
• Press the button #$ to move to the
next item.
4
In [Format], choose the date
and time format.
5
Check the information on the
screen and then press the
ADJ./OK button.
•
Once you have set the date and time,
the display returns to the Setup menu.
6
Press the MENU button or the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
• If the battery is removed for more than one week, the date and time settings will be
lost. These settings must be made again.
• To retain the date and time settings, load a battery with adequate remaining power for
more than two hours.
Setting the Date and Time
(Date Settings)
2008 01
00
Y
/
M
/
D
2008
/
01
/
01 00:00
hh:mm
00
01
2008 03
00
Y
/
M
/
D
2008
/
03
/
01 00:12
hh:mm
12
01