Filter
Top Products
81
Various Shooting Functions
1
Continuous
5
Compose your picture and then press and hold the
shutter release button.
• Pictures continue to be taken for as long as you hold down the shutter
release button.
6
Release your finger from the shutter release button to
stop taking pictures.
• To play back a still image shot in Continuous mode, set the camera to
playback mode (GP.50) and then press the ADJ./OK button !"#$
to select the still image you want to play.
S-Cont
5
Compose your picture and then press the shutter
release button.
• 16 pictures are taken automatically.
M-Cont
5
Compose your picture and then press and hold the
shutter release button.
• The camera memorizes the scene while you hold down the shutter
release button.
6
Release your finger from the shutter release button.
• The camera stops shooting and the 16 still images (in the previous 2
seconds) are recorded as one still image.
Note ----------------------------------------------------------------------------------------------
• To return to normal single-image shooting, select [Off] in Step 3, and press the ADJ./
OK button.
• In M-Cont mode, if you release the shutter release button within 2 seconds from the
time you first pressed it, the shots from the time you pressed the shutter until you
released it are recorded and the number of consecutive shots will be less than 16.
• The flash cannot be used.
• The camera shake correction function cannot be used during Multi-shot shooting. If
Multi-shot shooting is set while the camera shake correction function is turned on,
E changes to F. (GP.100)
• The focus and exposure value are locked in Multi-shot mode.
• When [Sequential No.] is set to [On] (GP.160) and the last four digits of the file
number exceed “9999” during Multi-shot, a separate folder is created in the SD
memory card and successive pictures taken in Multi-shot are stored in this folder.