Filter
Top Products
13
1
Getting Started
Installing the USB Driver
This section explains how to install the software for connecting the camera to
the PC by USB cable.
Follow these instructions only if connecting the camera to the PC by USB
cable.
Important
Note
• Do not connect the camera to the PC until the software has been
installed, otherwise installation will not proceed smoothly.
When you have established a connection, click [Cancel] on a plug &
play window that appears and remove the USB cable.
For Windows
If you are using Windows, install the USB driver as follows.
A Turn the PC on.
When Windows is up and running, proceed to the next step.
B Insert the CD-ROM provided in the CD-ROM drive of the PC.
C Double-click on [My Computer] and then double-click on the CD-
ROM. Next double-click on the [USB_Drvs] folder.
D Double-click on [Setup].
Installation of the software for connecting the camera by USB cable will start.
Follow the instructions displayed on the screen. When installation is completed,
proceed to the next step.