Filter
Top Products
21
1
Getting Started
C Insert the connector on the other end
of the cable into the USB port of the
PC.
D Turn the camera on.
The PC will automatically detect the
equipment which has been connected and
operate accordingly. If a message is
displayed, follow the instructions on the
screen.
USB connection is completed.
Before disconnecting the USB cable, check that data transmission is not
performed between a camera and a PC, turn off the camera and disconnect the
USB cable.
Important
Note
• For Windows Me user, make sure to give a time interval of more than
10-seconds when:
• Turning off and then on the camera
• Setting the mode dial from the modes other than Communication
mode to Communication mode.
• Inserting and removing the USB cable
• Do not remove the RDC-i virtual server process installed in Windows
Start-up item folder. The USB connection can not be made without it.