Filter
Top Products
14
Note
• Updated information on installation is provided in the [Readme] file in
the [Usb drvs] folders. If necessary, refer to this information.
• When you connect/remove the USB cable or cancel installation before
installing the USB driver, the cable may be recognized as an unknown
device for a PC. Refer to page 166 “Troubleshooting” for
troubleshooting.
For Macintosh
If you are using a Macintosh, install the USB driver as follows.
A Turn the PC on.
When the Macintosh is up and running, proceed to the next step.
B Insert the CD-ROM provided in the CD-ROM drive of the PC.
C Double-click on the CD-ROM. Next double-click on the [Usb driver]
folder, and then double-click on [RDC-i USB Inst].
Installation of the software for connecting the camera to the PC by USB cable
will start. Follow the instructions displayed on the screen. When installation is
completed, proceed to the next step.
Note
• Updated information on installation is provided in the [Readme] file. If
necessary, refer to this information.
• This USB driver cannot be used with Mac OS-X.