Filter
Top Products
Operate the Rimage 480i Printer
Placing a disc on the printer tray
To avoid scratching or damaging the recording surface of the disc, it is important to properly place
the disc on the printer tray. Use this procedure to properly place the disc on the printer tray.
Note: If you select Print from your software application, the printer tray opens automatically.
1. To open the printer tray, press
. The printer tray opens.
2. Carefully place the disc on the printer tray, aligning the hole in the disc with the small pins on
the printer tray.
3. To close the printer tray, press
. The printer tray closes. You are ready to use the
appropriate software application to print your disc label!
110761_C 7