Filter
Top Products
Rimage 480i Printer
4 110761_C
Printer control panel
The Rimage 480i Printer control panel has three buttons and
three LEDs to indicate certain conditions. The table below
explains each of these buttons.
LED: Light-emitting diode. A type of diode that emits light
when current passes through it.
Image Name Functionality
Cancel
/
Ink
Cartridge
Status
When you press the Cancel button, it provides limited functionality to
cancel printing.
The amber LED flashes when there is a hardware issue such as the ink
cartridges are incorrectly installed.
The amber LED is on continuously when an ink cartridge is low on ink. To
check the ink cartridge status, refer to the
Checking the ink levels
procedure on page
15.
Tray The Tray button is used to move the printer tray in and out and to load a
disc for manual printing or checking alignments. The tray LED lights
briefly when the button is pushed. A tray movement error causes the tray
LED to flash.
When you press the Power button, the power turns off or on. The green
Power LED is on when there is power to the printer. The Power LED
flashes when the printer is printing or in an error state.
Power