Filter
Top Products
Rimage 480i Printer
14 110761_C
ge
field.
Centering the image on the disc
The Rimage 2000i provides two ways to center the image on the disc. You can use the Auto Centering
method or the Manual Centering method. This process describes both processes. The Auto Centering
method is accurate to within +/- 0.5 mm. You can improve the centering position accuracy with the manual
centering adjustment to better than +/- 0.2 mm. For optimal print quality, use this procedure to center the
image on the disc.
# Tip: For additional
information about these
features, access the online
help in Printing
Preferences.
# Tip: Use the Center Ima
functionality only if the
printed image is not
centered on the disc.
Image centering is set at
the time of manufacture
and usually does not need
to be recalibrated in the
1.
Navigate to Printing Preferences.
2. Load a disc in the printer.
a. To open the printer tray, press
. The printer tray opens.
b. Place a 120 mm white disc on the tray.
3. Select Center Image. The Centering Margins for Disc Color Printer
480i dialog box displays.
4. Center the image.
• To Auto Center the image, select Center Image. The Rimage
2000i automatically centers the image.
• ually center the image, follow steps a - e
y.
c. nts a test
i. t where each long line crosses the set of index
ii.
•
line crosses the index line in
•
ne crosses the index line in
the Horizontal group.
displayed is approximately –
that you entered.
x.
6. Select OK to close the Disc C nter 480i Printing Preferences window.
7. To close the printer tray, press
To man
below.
a. Select Print Test. The Rimage 2000i prints a test
pattern on the disc and opens the tra
b. Rotate the disc approximately 180°.
Select Print Test. The Rimage 2000i pri
pattern on the disc and opens the tray.
d. Examine the disc and enter centering values.
Look a
lines.
Enter the correction values.
In the Vertical correction field, enter the index
value where the long
the Vertical group.
In the Horizontal correction field, enter the index
value where the long li
Note: Each line has a value of 5 units. The Horizontal value for the image
12. You must enter negative numbers with a minus sign (-).
4. Select Adjust. The Rimage 2000i centers the image according to the information
Vertical
Horizontal
-50
-40
-30
-20
-10
0
+10
+20
+30
+40
+50
-50
-40
-30
-20
-10
0
+10
+20
+30
+40
+50
Vertical
Horizontal
-50
-40
-30
-20
-10
0
+10
+20
+30
+40
+50
-50
-40
-30
-20
-10
0
+10
+20
+30
+40
+50
5. Select OK to close the Centering Margins for Disc Color Printer 480i dialog bo
olor Pri
. The printer tray closes.