Filter
Top Products
Operate the Rimage 480i Printer
Operate the Rimage 480i Printer
This chapter provides the information that you need to use and maintain your Rimage 480i
Printer.
Powering up the printer
The printer can be in either the ON state (Power
LED on) or the sleeping state (Power LED off).
Press the Power button to bring the printer out of the
sleep state and into the ON state.
Accessing the Power and USB Cables
To access the power and USB cables, you must
remove the Cable Access Door as shown.
Opening the Printer Service Door
To open the Printer Service Door, press the tab and
lift the door as shown.
Changing ink cartridges
Use this procedure to change the ink cartridges on your Rimage 480i Printer.
- Important You must use the appropriate ink cartridges in one of the configurations as stated
on page
1 in this document.
1. Lift the Ink Cartridge Access
Door. The ink cartridge
carriage moves to an
accessible position on the
carriage guide.
Note: You must wait until the
cartridges are resting and
uncapped before proceeding.
110761_C 5