Filter
Top Products
13
Identification of features
Still image mode
There are two ways in which to provide the camera with power. You can use batteries or
alternatively, you can use an AC(100 ~ 250V) Adapter (DC 3.3V 2.0A).
We recommend using batteries for a digital camera.
(use batteries that are within a year of their date of manufacture) The batteries are listed below.
Non rechargeable batteries : Duracell CP-1 battery
Rechargeable batteries : SLB-1037
Lamp
Connecting to a Power Source
You can select from Auto, Manual, or Night mode. In Manual
mode, any changes made to settings other than Self-Timer and
Voice Recording will be maintained even after the camera is
turned off.
Type Operation Lamp Camera Status Lamp LCD Monitor
When turning on the power
7 color lights blink and then turns off when
the camera is ready to take a picture
Blinks orange
X
When the camera is in focus (when the
SHUTTER button is pressed halfway)
X Green lamp lights up
Autofocus mark
lights up green
When the camera is out of focus (when the
SHUTTER button is pressed halfway)
X
Green lamp blinks
Autofocus mark
lights up red
While the flash is charging
X
Red lamp blinks
X
While saving an image X Green lamp blinks X
While shooting a video
Purple lamp blinks at a 1-second interval
X
Auto focus frame : White
During voice recording
Blue lamp blinks at a 1-second interval
X X
While the camera is connected to a PC
X
Green lamp lights up
X
While transferring data between the camera and a PC
X Green lamp blinks X
When shooting an image
Green Lamp Blinks once.
X X
Flash is ready (when the SHUTTER
button is pressed halfway)
X
Orange lamp lights up X
While the self-timer is running
Red lamp blinks for 7 seconds at a 1-second interval/blinks
for 3 seconds at a 0.25 second interval
X
X
When the LCD monitor is
turned off in Still Image mode
Green lamp lights up X X