Filter
Top Products
76
Start up image
Setting the Startup Sound
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
Shutter sound
Start up sound
You can select the shutter sound.
Selecting the Shutter Sound
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [SH.SOUND] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
You can select the sound that is activated whenever the camera is turned on.
MyCAM
AVATER
S.IMAGE
S.SOUND
SOUND1
SOUND2
SOUND3
BACK:
SET:OK
MyCAM
S.IMAGE
S.SOUND
SH.SOUND
SOUND1
SOUND2
SOUND3
BACK:
SET:OK
Only an image that is saved as a S.IMAGE in the [RESIZE] sub menu can be used as
the start up image.
The S.IMAGE will not be deleted by the [DEL.ALL] or [FORMAT] menu.
INFORMATION