Filter
Top Products
61
PictBridge: Picture Printing
When printing pictures by connecting the camera to the printer, use the AC adapter.
If the printer is turned off during printing, the printing will stop and the paper will be dispelled.
If there are continuous print error, please check the print condition.
INFORMATION
Printing Pictures
1. Connect the camera to your printer. The USB menu must
be set to [PRINTER] before you connect the camera to
the printer.(See p.58)
2. The [PICTBRIDGE] menu will appear.
3. Use the UP and DOWN buttons to select the [PRINT]
menu, and then press the OK button.
4. The screen shown on the right will appear and the picture
will be printed. If no picture is selected, the [NO IMAGE!]
message will be displayed. If you press the SHUTTER
button during printing, printing will be cancel and the menu
from Step 2 will appear.
5. If an error occurs during printing, the screen shown below will appear.
Press the OK button to cancel printing.
Follow the Steps 1 to 4 again to print the
picture(s).
Select the submenu values by
pressing the UP/DOWN button and
then press the OK button.
If [RESUME] is selected: continues printing.
If [CANCEL] is selected: cancels printing.
[ Fatal error ] [ Recoverable error ]
PICTBRIDGE
IMAGES
SETUP
PRINT
00 PRINTS
CUSTOM
MOVE: SET:OK
STOP:SHUTTER
CHECK PAPER
SET:OK
WARNING
RREESSUUMMEE
CCAANNCCEELL
OOKK:: CCOONNFFIIRRMM