Filter
Top Products
53
Protecting images
4. Select the desired secondary menu by pressing the
UP/DOWN button and press the OK button.
[UNLOCK] : Cancels the protect function.
[LOCK] : Sets up the protect function.
- If you select the[ONE PIC] sub menu at step 3, you can
protect or unprotect another image by pressing the
LEFT/ RIGHT button. If you press the SHUTTER button,
the Image Protection menu will disappear.
- If you selected [ALL] in Step 3, the Image Protection menu will disappear.
- If you protect an image, the protect icon( ) will be displayed on the LCD monitor.
(An unprotected image has no indicator)
- An image in LOCK mode will be protected from [DELETE] or [DELETE ALL] functions, but
will NOT be protected from the [FORMAT] function.
Images can be displayed continuously at pre-set intervals. You can view the slide show by
connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [SLIDE]
menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the RIGHT button.
- Slide Show Display Interval: OFF, 1 ~10 seconds
4. Use the UP and DOWN buttons to set whether to repeat
the slide show.
[ON] :
Even once a cycle(from the first image to the last image)
is completed, the slide show will continue to repeat itself.
[OFF]: If a cycle is completed, the slide show will stop
automatically.
5. Press the OK button and the slide show will start.
- To pause the slide show, press the play & pause button.
- To start the slide show again, press the play & pause
button again.
-
Press the menu button again and the slide show will stop.
The loading time depends on the image size and quality.
The slide show will start from an image that was displayed on the LCD monitor.
The [PWRSAVE] function can t be activated.
While the slide show is playing, only the first frame of an MOVIE file is displayed.
In case of a voice file, the voice recording icon will appear.
INFORMATION
Starting the slide show
LOCK
MOVE PIC: SET:OK
EXIT:SH1
EXIT:MENU MOVE:
OFF
01
SLIDE
BACK: SET:OK
SEC
SLIDE
REPEAT
ON
OFF