Filter
Top Products
6
Move
OK
Select
MENU
Exit
Off
On
M.Player Mode
►Memory
Delete
Delete All
Protect
Print Mark
Format
3
Photo
100-0001 [1/10]
Previous Page Next Page
7
Photo
100-0001 [1/10]
Previous Page Next Page
ENGLISH
100
Digital Still Camera Mode
Protection from accidental Erasure (Protect)
The Protect function works only in M.Player Mode.
page 26
You can protect important images from accidental erasure.
If you execute format, all images including protected images will be erased.
1. Set the
[Mode] switch to [CARD].
2. Set the
[Power] switch to [ (Player)].
The thumbnail index of photo image appears. If there are no recorded images on the
Memory Card, <No file!> is displayed.
3. Use the
[Joystick] to select images to be protected.
4. Press the [MENU] button.
The menu list will appear.
5. Move the
[Joystick] up or down to select <Memory>, then press the [Joystick(OK)].
6. Move the
[Joystick] up or down to select <Protect>, then press the [Joystick(OK)].
7. Move the
[Joystick] up or down to select <On>, then press the [Joystick(OK)].
The protection icon ( ) is displayed.
Notes
It operates identically in Single Image Display mode.
You can directly access the Protect function by using the [QUICK MENU].
page 27
Protected images will show the ( ) mark when they are displayed.
If the write protection tab on the Memory Card is set to LOCK, you cannot set image
protection.