Filter
Top Products
4
5
8
Adjust
OK
Select
MENU
Exit
Camera Mode
►System
Clock Set
Beep Sound
Language
Demonstration
JAN 01 2006
12 : 00 AM
Move
OK
Select
MENU
Exit
Camera Mode
►System
Clock Set
Beep Sound
Language
Demonstration
JAN 01 2006
12 : 00 AM
Complete !
Move
OK
Select
MENU
Exit
Camera Mode
►System
Clock Set
Beep Sound
Language
Demonstration
►On
►English
►Off
ENGLISH
30
Initial Setting : System Menu Setting
Setting the Clock (Clock Set)
Clock setup works in Camera Mode/Player Mode/M.Cam Mode/M.Player Mode.
page 26
The date/time is automatically recorded onto a disc. Before recording, please set the date/time.
1. Set the
[Mode] switch to [DISC] or [CARD].
2. Set the
[Power] switch to [ (Camera)] or [ (Player)].
3. Press the
[MENU] button.
The menu list will appear.
4. Move the
[Joystick] up or down to select <System>, then press the [Joystick(OK)].
5. Move the
[Joy stick] up or down to select <Clock Set>, then press the [Joystick(OK)].
The month will highlight first.
6. Move the
[Joystick] up or down to set current month, then press the [Joystick(OK)].
The day will be highlighted.
7. You can set the day, year, hour, minute, and AM/PM following the same procedure after
setting the month.
8. Press the
[Joystick(OK)] after setting AM/PM.
A message <Complete !> is displayed.
To adjust the clock, select the Year, Month, Day, Hour, Min, or AM/PM by pressing the
[Joystick(OK)], then move the [Joystick] up or down to set respective values.
9. To exit, press the
[MENU] button.
Notes
After the Lithium Battery loses its charge (after about 6 months), the date/time appears
on the screen as 12:00 AM JAN.01.2006.
You can set the year up to 2040.
If the Lithium Battery is not installed, data inputted will not be backed up.