Filter
Top Products
SP
Disc is not formatted.
Format?
Video
VR
Cancel
STBY
<When a DVD-RW disc is formatted.>
ENGLISH
41
DVD Camcorder: Before Recording
When using a New Disc: Formatting a new Disc
Formatting may be required if a new disc is inserted.
Recognition of the disc will start.
For a DVD–R/+R DL disc:
Formatting will automatically begin.
For a DVD-RW disc: You are prompted with the <Disc is not formatted. Format?> message.
Differences between
Video and VR mode
Video (Video Mode) : If the disc has been fi nalized, you will be able to
play the disc on most DVD Players/Recorders.
VR (VR Mode) : You can edit the disc on a DVD Camcorder, but
playback is only possible on a DVD Recorder.
Move the [Joystick] left or right to select <Video> or <VR>, then press [Joystick(OK)].
Please refer to Page 11 for applications by mode.
Upon completion, the <Complete !> message will appear.
If you select <Cancel>, the <Not formatted!> warning message will appear.
Formatting a new disc is required to record on it. To format later, use the
<Disc Manager>
menu.
page 84
For a DVD+RW disc: You are prompted with the <Disc format? All fi les will be deleted!>
message.
Move the [Joystick] left or right to select <Yes>, then press [Joystick(OK)].
Upon completion the <Complete !> message will appear.
If you select <No>, the <Not formatted!> warning message will appear.
Formatting a new disc is required to record on it. To format later, use the <Disc Manager> menu.
page 84
Removing a Disc
1. Push the
[OPEN] switch in the direction of the arrow.
The cover of the disc compartment will open.
2. Gently open the cover by hand until it stops.
3. Remove the disc.
While pushing down the center portion of the turntable, pick up the disc by the edges to remove.
4. Gently push the section marked
[PUSH CLOSE] on the cover of the disc insertion block, to close the cover.
Refer to page 12 for Finalized disc compatibility.