Filter
Top Products
English-2
Installing the TV Camera
As the figure below shows, the TV camera is designed to be put on
the top of the TV.
How to install the TV camera
1 Put the TV camera on the top center of your TV as shown above.
2 Connect the TV camera to your TV with a USB cable.
3 Clutch and hold the camera’s neck, and bend its head to the
angle you prefer.
4 The TV camera is designed to be mounted. Do not apply
excessive force when manipulating it.
Operating the TV Camera
Power
LED
Shutter
switch
●
Slide the cover switch on the top of the
TV camera to the left to expose the lens.
●
When you turn on your TV, the indicator
light next to the lens turns on in blue and
turns off after a while.
✎
The indicator light turns on only
during your call.
●
S
tart and log on to Skype™ App (SMART
HUB menu). The TV camera will be ready
to make an audio or video call.
✎
V
isit www.samsung.com to find details
about how to use Skype™ App.
●
To enable the Motion Control feature, select and activate the Motion
Control menu from the TV menu.
✎
For more information on the Motion Control feature, refer to Menu
→ Support → e-Manual.
●
For more information on the Face Recognition function, refer to the
e-Manual of the TV or the manual of the Skype App.
●
To enable any of the Motion Control and Face Recognition functions,
make sure that the TV is connected to the network.
Checking the operating status of the camera
Power
supply
If the TV is powered on, check that the blue power
LED on the front of the TV camera is turned on.
Video
output
Connect to Skype™
→
Select Settings
→
Select
Change picture
→
Select Video snapshot
→
Check
the video display status
Audio input
Connect to Skype™
→
Select Contact
→
Select
Echo/Sound Test Service
→
Select Voice Call
→
Record following voice instructions
→
Check the
recording after 20 seconds.
Motion
Control
From the Menu screen, select Smart Features
→
Motion Control
→
Motion Control Environment Test,
and follow the onscreen instructions to check the
status of the motion operations.
0 ~ 90˚
0 ~ 175˚
01_Eng.indd 2 2013-03-29 4:12:23