Sanyo VCC-MD400 Security Camera User Manual


 
− 23 −
Note 3 Exclusive processing
Setting to auto iris mode, when SENSE UP is set
When unable to set
・
Cannot be set when the motion sensor is set to
ON.
Cannot be set when auto pursuit is set to ON.
Auto switch setting
Sets AGC to ON.
Sets the shutter speed to normal settings.
Set to auto switch setting when set to manual
iris (EI ON)
Auto switch setting
Sets the shutter speed to normal settings.
When setting SENSE UP
(*Valid with auto iris mode)
When unable to set
・
Cannot be set when the motion sensor is set to
ON.
Cannot be set when AGC is set to OFF.
Cannot be set when auto pursuit is set to ON.
Auto switch setting
Sets the shutter speed to normal settings.
Changes V-RESO UP to OFF.
When setting shutter speed to high-speed
shutter mode (SHORT)
When unable to set
・
Cannot be set when set to auto iris and SENSE
UP.
・
Cannot be set when set to manual iris and EI ON.
When setting the shutter speed to long exposure
shutter mode (LONG)
When unable to set
・
Cannot be set when set to auto iris and SENSE
UP.
・
Cannot be set when set to manual iris and EI ON.
・
Cannot be set when the motion sensor is set to
ON.
・
Cannot be set when auto pursuit is set to ON.
Auto switch setting
・
Changes V-RESO UP to OFF.
When setting the motion setting to ON
When unable to set
・
Cannot be set when set to auto iris and SENSE
UP.
・
Cannot be set when the shutter speed is set to
long exposure shutter mode (LONG).
Auto switch setting
Changes auto pursuit to OFF.
When setting V-RESO UP to ON
When unable to set
・
Cannot be set when the shutter speed is set to
long exposure shutter mode (LONG).
・
Cannot be set when set to auto iris and SENSE
UP.
・
Cannot be set when set to AGC ON and DNR ON.
When setting DNR to ON (*Valid when AGC ON)
Auto switch setting
Changes V-RESO UP to OFF.
AWhen setting AGC to OFF
When unable to set
Cannot be set when D/N is set to AUTO.
・
Cannot be set when set to auto iris and SENSE
UP.
When setting D/N to AUTO
Auto switch setting
Changes AGC to ON.
When setting auto pursuit to ON
When unable to set
・
Cannot be set when set to auto iris and SENSE
UP.
・
Cannot be set when the shutter speed is set to
long exposure shutter mode (LONG).
Auto switch setting
・
Changes the motion sensor to OFF.
Communications Protocol
Model: VCC-MD800/700/600/500/400/300