Filter
Top Products
VL-A10H/pp. 024-037; 00/2/2/18:00
G.K. Associates, Tokyo
Useful Features
Useful Features
37
Using the Remote Control
Use the remote control to operate the VIEW-
CAM from a distance, such as when you want
to record yourself in a scene, or when the
VIEWCAM is connected to a TV for use as a
VCR.
Installing the Batteries in the Remote
Control
1 Open the battery compartment cover.
2 Insert the two supplied AA (R6 or UM/
SUM-3) batteries with the battery poles
positioned as indicated.
3 Replace the cover.
Caution:
• Do not use old and new batteries together or
batteries of different brands together.
Turning On the Remote Control Mode
1 Press the MENU button until appears
(VCR mode).
2 Press the ĭ or İ button (Q) to select
“REMOTE”, then press the SET button
(B) (W) to select “ON” .
3 Press the DISPLAY button to turn off the
menu screen.
Operating the Remote Control
Aim the remote control at the remote sensor of
the VIEWCAM, and press the control buttons for
operation.
5 m
1 2
VOLUME buttons
PAUSE/STILL button
RECord START/STOP button
REWind/Reverse Search button
STOP button
PLAY button
Fast Forward/
Forward Search button
Power Zoom Telephoto/
Wide angle control
buttons
Remote sensor
Approximate operating
range of remote control
Notes:
• Be careful not to allow direct sunlight or bright
light from interior illumination to fall onto the
VIEWCAM remote sensor, as this may prevent
the remote control from operating properly.
• Be sure that there are no obstacles between the
remote control and the VIEWCAM remote sensor.
• The remote control cannot be used to move the
pointer, or select or set any of the various
functions on the monitor.
• When the batteries are depleted and the remote
control does not operate, replace them with new
AA (R6 or UM/SUM-3) batteries.
• You can also turn on the Remote Control mode
on the (MENU 1) screen in Camera mode.
SET
MENU
TURE
PIC
-
SET
EDIT
REMOTE
OFF
ON