Sharp VL-A10H Camcorder User Manual


 
VL-A10H/pp. 053-055; 00/8/22/18:00
G.K. Associates, Tokyo
References
References
55
Specifications
VIEWCAM
Signal System: PAL standard
Recording System: 2 rotary heads, helical scanning system
Cassette: 8 mm video tape, MP type
Recording/Playback Time: 120 minutes (P5-120)
Tape Speed: 20.051 mm/second
Pickup Device:
1
4Љ (6.4 mm, effective size: 4.5 mm) CCD image sensor (with
approx. 320,000 pixels including optical black)
Lens: 16ן power zoom lens (F1.4, fס4.0–64.0 mm), and full-range
auto focus
Lens Filter Diameter: 46 mm
Monitor: 3Љ (7.5 cm) full-colour LCD screen (TFT active matrix)
Microphone: Electret monaural microphone
Colour Temperature Compensation: Auto white balance with white balance lock
Minimum Illumination: 0.8 lux* (with gain-up, F1.4)
Video Output Level: 1.0 Vp-p 75-ohm unbalanced
Audio Output Level: מ8 dBs, impedance less than 2.2 kohms
Speaker Output: 200 mW
Power Requirement: DC 3.6 V (with battery pack)
DC 7.0 V (with AC adapter)
Power Consumption: 4.9 W (during camera recording in full auto mode with zoom
motor off and backlight in normal mode)
Operating Temperature: 0ЊC to ם40ЊC
Operating Humidity: 30% to 80%
Storage Temperature: מ20ЊC to ם60ЊC
Dimensions (approx.): 183 mm (W) ן 109 mm (H) ן 99 mm (D)
Weight (approx.): 710 g (without battery pack, lithium battery, video cassette, and
lens cap)
AC Adapter (UADP-0313TAZZ)
Power Requirement: AC 110–240 V, 50/60 Hz
DC Output: 7.0 V
Power Consumption: 15 W
Dimensions (approx.): 68 mm (W) ן 37 mm (H) ן 130 mm (D)
Weight (approx.): 233 g
Specifications are subject to change without notice.
*Minimum illumination: Since there is no widely accepted testing procedure for determining minimum
illumination capability, lux ratings are comparable only between models from the
same manufacturer.