Filter
Top Products
Preparation
Preparation
17
Changing to the 12-hour Time Mode
1 After performing step 10 above, press l
or m to select “12H/24H”, then press the
SET button.
2 Press l or m to select “12H”, then
press the SET button.
3 Press the MENU button to turn off the
menu screen.
Notes:
• The date and time, once set, are internally
recorded even when not displayed on the
screen.
• The menu screen automatically turns off if no
settings are made within five minutes.
Attaching the Lens Hood
When recording outdoors on a sunny day or in
a location with bright lighting, attach the
supplied lens hood to the camcorder. Turn the
lens hood in the direction of the arrow to attach
it.
To remove it, turn it in the opposite direction.
Notes:
• The lens cap can still be attached on top of the
lens hood.
• Filters and other accessories cannot be attached
on the top of the lens hood.
CLOCK SET
DISPLAY
SUMR TIME
SETTING
AREA
12H 24H/
RETURN
12H
24H
12H
21H24H
Attaching the Straps
Attach the hand strap or the shoulder strap to
the strap loop as shown below.
When using the shoulder strap
(Only supplied with VL-NZ10)
Adjust the length of its loop as shown below, to
fit it on your shoulder.
Cautions:
• Do not swing the camcorder by the strap.
• To avoid accident, make sure the shoulder strap
does not get caught in other objects or wrapped
around the neck. And pay close attention to the
following:
—Do not use the shoulder strap when riding on
bicycle or motor cycle.
—Do not allow children to be mischievous with
the shoulder strap.
—Keep a firm hold of the camcorder to prevent
it from swinging and hitting others.
Strap loop
Hand strap
Shoulder strap
(VL-NZ10 only)