Silvercrest DV-767 Camcorder User Manual


 
17
12 Video Playback
Switch the camera on and use the Capture / Playback switch to select Playback. To get to the
Video mode, press the Mode button
as often as necessary until the symbol for the Video
mode appears at the top left of the LCD display
.
Once in Video Playback mode, preview images of your videos are displayed. You can use the
Navigation button
(e and f) to select between these videos.
To play back one of these preview images, select the preview image and press the Navigation
button
. The video is now displayed on the entire display screen. You can use the Navigation
button
(e and f) to display the next or previous video in full-screen mode. In the upper area of
the screen, you can see which of your videos is being displayed.
Use the Capture button
to start and stop a video recording. Press the Navigation button to
return to the preview mode.
12.1 Volume
When viewing a video in full-screen mode, you can alter the volume. Push the Navigation button
in the following directions:
c to increase the volume (up to a maximum of 35)
d to reduce the volume.
On the display, the symbol
shows the volume selected.
12.2 Deleting Videos
You have two options for deleting videos from your camera:
If you are in the Video Playback mode, you can use the Navigation button
to select the video
that you wish to delete. If you now press the Flash/Delete button
, then the question “Really
Delete?” is displayed. By using the Navigation button
(e and f) you can choose between the
options “Yes” and “No”. Choose “Yes” and press the Navigation button
if you wish to delete
the current video, or choose “No” and press the Navigation button
if you do not wish to delete
the current video.
If you are in Playback mode, pressing the Menu button
takes you to a menu, in which you can
change various settings (for more information, read the point “Delete” on page 24). Choose the
menu point “Delete”. The question “Really Delete?” is displayed. By using the Navigation button
(e and f) you can choose between the options “Yes” and “No”. Choose “Yes” and press the
Navigation button
if you wish to delete the current video, or choose “No” and press the
Navigation button
if you do not wish to delete the current video.
12.3 Playback Settings
To change settings, set your camera to
Playback mode (see page 11) and activate the
Video mode (see page 11). Press the Menu
button
to go to the settings menu. Here, you
can use the Navigation button
(d and c) to
choose between the following settings.