Filter
Top Products
28
18 Settings
This chapter describes how you can change
general camera settings, such as the time and
language. In order to change these settings, the
camera must be switched on. It can, however,
be in any mode. Press the Menu button
to
display the settings menu. If the light marking
on the top edge of the screen is on the left side,
then press f on the Navigation button
to
switch to the right entry “Setup”.
The menu above is displayed. You can use the
Navigation button
(d and c) to choose
between the following settings.
18.1 Set Clock
This setting allows you to set the date and time.
By using the Navigation button
(e and f) you can switch between year, month, day,
hour and minute. Choose c or d to set the values.
18.2 Auto OFF
With this setting you can set the camera to switch itself off if not in use after a certain amount of
time.
You can use the Navigation button (e and f) to select the following time periods: 3min, 5min,
8min and Off
18.3 Beep
This setting allows you to activate or deactivate the beep made by the camera when
certain buttons are pressed, such as when taking a photo.
To do this, use the Navigation button
(e and f) to select “On”, to activate the beep, and “Off”, to
deactivate it.