Filter
Top Products
Adjusting and Setting With Menus
COLOR Menu
24
The COLOR AE feature is available only when MODE
(exposure mode) is set to any item other than
MANUAL.
OFF: COLOR AE does not function.
CHECK: The region of the color specified with PHASE
is displayed in white. The region is set to STD when
CHECK is selected.
WIDE: The region of the color specified with PHASE
becomes wide.
STD: The region of the color specified with PHASE is
that between NARROW and WIDE.
NARROW: The region of the color specified with
PHASE becomes narrow.
When an item other than OFF is selected, PHASE is
displayed, and you can specify the color for which the
exposure is automatically adjusted. The adjustable range
is from 0 to 71.
To set the COLOR AE
1
Set COLOR AE to CHECK.
2
Select PHASE to adjust so that the color region in
which the exposure is automatically adjusted is
displayed in white.
3
Set COLOR AE to NARROW, STD, or WIDE.
Note
You cannot store the status when CHECK is selected in
the preset memory of the camera.
ND FILTER
Select the filtering level of the camera’s built-in ND
FILTER.
Select from among OFF, 1/4, and 1/16.
OFF: ND FILTER does not function.
1/4: Decrease the amount of light by 1/4.
1/16: Decrease the amount of light by 1/16.
Note
If you switch the ND FILTER during shooting, camera
image may be distorted.
COLOR Menu
The COLOR menu is used to adjust the white balance
and the color.
WHITE BALANCE (white balance mode)
Select the white balance mode from among the
following:
AUTO1, AUTO2, INDOOR, OUTDOOR, ONE PUSH,
MANUAL
AUTO1: Adjusts the white balance automatically while
leaving natural colors.
AUTO2: Adjusts the white balance automatically.
INDOOR: The R.GAIN and B.GAIN values are fixed
to those for a color temperature of 3200K.
OUTDOOR: The R.GAIN and B.GAIN values are
fixed to those for a color temperature of 5800K.
ONE PUSH: The white balance adjustment is activated
when you zoom in on a white object in the center of
the screen and press the HOME button on the
supplied Remote Commander, or press the button
on the top of the joystick or the ONE PUSH AWB
button on the RM-BR300 Remote Control Unit.
MANUAL: Adjusts the white balance manually.
When you select any mode of WHITE BALANCE,
some of the following setting items that are required for
the selected mode appear.
WB SENS: You can adjust the speed with which the
color of an object is put close to white balance
focusing point in AUTO1 or AUTO2 mode. Set to
HIGH to do so at higher speed and to LOW to do so
at lower speed.
You can also adjust the red or blue tint when
shooting an object under reddish light sources such
as an incandescent light and candle, or under bluish
light sources such as the shade. Selecting HIGH
decreases red or blue tint, and selecting LOW
increases red or blue tint.
WB R.SHIFT, WB B.SHIFT: You can shift the white
balance focusing point in automatic white balance
mode to your favorite red tint (WB R.SHIFT) or
blue tint (WB B.SHIFT) individually. The
adjustable range of each item is from –7 to +7.
<COLOR>
>WHITE BALANCE
WB SENS
WB R.SHIFT
WB B.SHIFT
COLOR GAIN
COLOR HUE
COLOR MATRIX
R.ENHANCE
G.ENHANCE
B.ENHANCE
YL.ENHANCE
CY.ENHANCE
MG.ENHANCE
AUTO1
MID
0
0
0
0
ON
0
0
0
0
0
0