Filter
Top Products
Installation and Connections
Installation
50
7
Secure the ceiling brackets (A) and (B) using the
supplied three screws (3M3 × 8).
8
Connect the cables to the connectors on the rear of
the camera.
Note
Take the proper steps to ensure that the load of the
cables connected does not cause problems.
To remove the camera
1
Remove the three screws used to attach the camera
in step 7 of “Installation on a shelf, etc. in a high
position (example).”
2
Turn the camera with the bracket counterclockwise
to remove.
3M3 × 8
(supplied)