Filter
Top Products
Operation Using the Supplied Remote Commander
Storing the Camera Settings in Memory – Presetting Feature
34
Shooting with Back Lighting
When you shoot a subject with a light source behind it,
the subject becomes dark. In such a case, press the
BACK LIGHT button.
To cancel the function, press the BACK LIGHT button
again.
Note
The BACK LIGHT function is not effective if MODE is
set to MANUAL in the EXPOSURE menu of the
camera.
Storing the Camera
Settings in Memory
– Presetting Feature
Up to six combinations of settings (six positions)
including camera position, zooming, focusing, and
backlighting, can be preset.
Note
The camera can store up to sixteen combinations of
settings (sixteen positions) in the memory, but the
supplied Remote Commander supports preset of six
positions only (POSITION 1 to 6). Use the RM-BR300
Remote Control Unit (not supplied) to store the settings
in POSITION 7 to 16.
For details of the camera settings to be preset, see
“Presetting Items” on page 64.
1
Press the PAN-TILT RESET button to reset the pan/
tilt position.
2
Adjust the position, zooming, focusing and
backlighting of the camera (pages 32 to 33).
3
While holding down the PRESET button, press any
of the POSITION buttons, 1 to 6, in which you want
to store the settings.
The message “PRESET No.xx” (selected
POSITION number) is displayed for about 2
seconds.
AUTO
DATA SCREEN
STD REV
BACK LIGHT
123
MANUAL
NEARFAR
FOCUS
Subject appears brighter.
POWER
CAMERA SELECT
1
2
3
AUTO
POSITION
HOME
RM-EV100
STD REV
BACK LIGHT
MANUAL
FAR
NEAR
W
T
W
T
12
3
456
PAN-TILT
L/R
D
IRECTI
O
N SET
PA
N
-
TILT
RES
E
T
DATA SCREEN
RESET
RESET
PRESET
SLOW
F
AST
ZOOM
FOCUS
2
2
1
3
POSITION 1-6
3
PRESET
DATA SCREEN
POSITION
STD REV
BACK LIGHT
123
456
RESETPRESET
While holding down
Press a POSITION
button.