Sony Digital Video Camera Recorder Camcorder User Manual


 
Other functions
38
1 Start up the computer, and double-
click [ImageMixer Ver.1.5 for Sony]
displayed on the desktop.
2 Click (Capture Environment).
3 Click (DV Camcorder Capture
Mode).
z Tip
You can also use the USB cable to connect your
camcorder and computer for converting signals.
Click (USB Device Capture Mode) in this case.
4 Click (Preference), check
[Capture using DV Cam.] in [DVC
Capture settings], then click [OK].
5 Connect your camcorder to the
computer using an i.LINK cable
(optional), then connect it to a VCR
(analog equipment) using the A/V
connecting cable (supplied).
b Note
When you connect your camcorder to a
computer, make sure you insert the connector in
the correct direction. If you insert the connector
forcibly, it may be damaged, and causes a
malfunction of your camcorder.
6 Prepare the power source for your
camcorder, then slide the POWER
switch repeatedly to select the PLAY/
EDIT mode.
7 Touch [P-MENU], [MENU], [
(STANDARD SET)]and [A/VtDV
OUT], then touch to select [ON].
For details, refer to the separate Camera
Operations Guide supplied with your
camcorder.