Filter
Top Products
100
Saving and Loading User Files
Chapter 6 Saving and Loading User Setting Data
1
On the USER FILE page, turn the MENU knob to
move the
b mark to “F. ID.”
2
Press the MENU knob.
A character table appears, allowing you to select
characters you want to enter.
3
Follow the procedure of steps 4 and 5 described in “5-
2-7 Setting the Shot ID” (page 80) to enter the file ID.
4
When you finish entering the file ID, turn the MENU
knob to move the x mark to “END,” then press the
MENU knob.
The entered file ID is now displayed.
After setting the file ID, carry out the procedure from
step 3 in “6-1-2 Saving USER Menu Data (User File)
to the “Memory Stick”” (page 98).
The set file ID is saved in the “Memory Stick” with the
data.
Selecting the display contents
You can select the contents of the file to be displayed on
the USER SAVE page and USER LOAD page.
Proceed as follows:
1
Turn the MENU knob to move the b mark to
“DISPLAY MODE,” and press the MENU knob.
2
Turn the MENU knob to move the b mark until the
desired type of the display contents (see the following
table) appears, then press the MENU knob.
6-1-3 Loading Saved Data from a
“Memory Stick”
The data loaded from the “Memory Stick” overwrites the
data saved in the camcorder.
Proceed as follows:
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the screen.
2
Turn the MENU knob until the USER FILE page
appears, then press the MENU knob. Alternatively,
select “USER FILE” on the CONTENTS page.
3
Turn the MENU knob to move the b mark to “USER
FILE LOAD,” and press the MENU knob.
The P00 USER LOAD page appears.
4
Turn the MENU knob until the page which contains
the desired file number appears, then press the MENU
knob.
F01 USER FILE
USER FILE LOAD : EXEC
USER FILE SAVE : EXEC
F.ID :
sssssssssssssssss
USER PRESET : EXEC
TOP
F01 USER FILE
USER FILE LOAD : EXEC
USER FILE SAVE : EXEC
F.ID :?
x
!#$%&'()*+,-./012345678
9:;<=>?@ABCDEFGHIJKLMNOP
QRSTUVWXYZ[Y]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET ESC END
TOP
F01 USER FILE
USER FILE LOAD : EXEC
USER FILE SAVE : EXEC
F.ID :
sssssssssssssssss
USER PRESET : EXEC
TOP
File ID set in step 3
Display type Description
ALL File ID (10 characters) and date ((month/
day/year) for the DVW-970 and (day/
month/year) for the DVW-970P))
F.ID File ID (16 characters)
DATE Saved date (year/month/day/hours/
minutes/seconds)
MODEL Information on the model
Note
P00 USER LOAD
DISPLAY MODE : F.ID
001.USER1
002.USER2
003.NO FILE
004.USER4
005.USER5
ESC
?P00 USER LOAD
DISPLAY MODE : ALL
001.USER1 JAN/01/04
002.USER2 JAN/15/04
003.NO FILE
004.USER4 FEB/05/04
005.USER5 FEB/20/04
ESC