Sony DVW-970/970P Camcorder User Manual


 
97
Chapter 6 Saving and Loading User Setting Data
Chapter
Saving and Loading User Files
6
Saving and Loading User
Setting Data
6-1 Saving and Loading
User Files
The camcorder is equipped with a “Memory Stick” drive,
which enables you to save user files, scene files, lens files,
reference files and ALL files. You can load these files
from the “Memory Stick” for immediate recall of a
particular setting configuration.
When a menu page is displayed, you can set up the
camcorder so that inserting a “Memory Stick”
automatically jumps to the appropriate file-related menu
page.
For details about scene files, see “6-2 Saving and Loading
Scene Files” on page 101.
For details of the function for jumping to the appropriate
file-related menu page, see “6-3 Jumping to a File-Related
Menu Page When Inserting a “Memory Stick”” on page
105.
“Memory Sticks” usable with this camcorder
With this camcorder, you can use “Memory Sticks” whose
capacity does not exceed 128 MB.
For details, see “Memory Stick” in “Specifications” on
page 130.
6-1-1 Handling the “Memory Stick”
The “Memory Stick” can be inserted to or removed from
the camcorder with the power turned on or off.
Inserting the “Memory Stick”
Proceed as follows:
1
Push the MEMORY STICK OPEN button.
The cover of the “Memory Stick” compartment opens.
2
Hold the “Memory Stick” with the notch facing
downward and the label side facing toward you, and
insert the “Memory Stick” into the “Memory Stick”
insertion slot until it clicks into place. Then, close the
cover.
If it does not fit into the slot properly or if there is some
resistance when you insert it, the “Memory Stick” may be
turned around or upside down. Do not force the “Memory
Stick” into the slot. Confirm the direction of the notch and
arrow on the “Memory Stick” before inserting the
“Memory Stick,” and then try inserting it again.
Removing the “Memory Stick”
Press the MEMORY STICK OPEN button to open the
cover of the “Memory Stick” compartment.
Push the eject button after confirming that the ACCESS
indicator is not lit. The “Memory Stick” pops out.
Note
MEMORY STICK OPEN button
Label side of “Memory Stick”