Filter
Top Products
138
Menu List
Appendixes
PAINT Menu
The following table lists and describes the items in the
PAINT menu.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
No. Page Item Settings Default Description
P01 SW STATUS GAMMA OFF/ON ON Turns the gamma correction on/off.
CHROMA OFF/ON ON Turns the chroma of the composite signal on/
off.
MATRIX OFF/ON ON Turns the linear matrix correction on/off.
KNEE OFF/ON ON Turns the knee correction on/off.
WHITE CLIP OFF/ON ON Turns the white clipping correction on/off.
DETAIL OFF/ON ON Turns the detail signal on/off.
APERTURE
OFF/ON ON Turns the aperture function on/off.
FLARE ON/OFF ON Turns the flare function on/off.
EVS OFF/ON OFF Turns the EVS shutter on/off.
TEST SAW OFF/REC/SAW OFF Selects the test signal.
P02 WHITE COLOR TEMP <A> Display color
temperature
3200 Sets the color temperature of WHITE A.
COLOR FINE <A>
(–99 to +99)
0 Adjusts the value more precisely when the
color temperature adjustment through
COLOR TEMP is not satisfactory.
R GAIN <A>
(–99 to +99)
0 Only the value of R GAIN is changed.
B GAIN <A>
(–99 to +99)
0 Only the value of B GAIN is changed.
D5600K <A> OFF/ON OFF Turns the WHITE A electronic 5600K filter on/
off.
COLOR TEMP <B> Display color
temperature
3200 Sets the color temperature of WHITE B.
COLOR FINE <B>
(–99 to +99)
0 Adjusts the value more precisely when the
color temperature adjustment through
COLOR TEMP is not satisfactory.
R GAIN <B>
(–99 to +99)
0 Only the value of R GAIN is changed.
B GAIN <B>
(–99 to +99)
0 Only the value of B GAIN is changed.
D5600K <B> OFF/ON OFF Turns the WHITE B electronic 5600K filter on/
off.
P03 BLACK/FLARE MASTER BLACK
(–99 to +99)
0 Adjusts the master black level.
R BLACK
(–99 to +99)
0 Adjusts the R black level.
B BLACK
(–99 to +99)
0 Adjusts the B black level.
MASTER FLARE
(–99 to +99)
0 Adjusts the flare level of the master.
R FLARE
(–99 to +99)
0 Adjusts the R flare level.
G FLARE
(–99 to +99)
0 Adjusts the G flare level.
B FLARE
(–99 to +99)
0 Adjusts the B flare level.
FLARE OFF/ON ON Turns the flare correction circuit on/off.
TEST OUT SELECT ENC/R/G/B ENC Selects the output signal of TEST OUT
connector.