Filter
Top Products
28
Warnings and Indications
Chapter 2 Locations and Functions of Parts and Controls
2-7 Warnings and Indications
Besides the viewfinder, speaker and earphones, the
indicators and displays described in this section also
provide you with information such as the operating state of
the camcorder and warnings.
Warning and indication functions
a TALLY indicator
Setting the TALLY switch on the viewfinder to HIGH or
LOW enables this indicator. It lights when the VTR starts
recording. Like the REC indicator in the viewfinder, it also
flashes to provide warnings. The brightness of this
indicator when it is lit can be switched with the TALLY
switch.
b DISPLAY switch
This switches the indications on the viewfinder screen on
or off.
ON: The indications appear on the viewfinder screen.
OFF: The indications do not appear on the viewfinder
screen.
Setting the MENU ON/OFF switch to ON displays the
menu on the viewfinder screen even if the DISPLAY
switch is set to OFF.
c TALLY switch
This switch controls the TALLY indicator as follows:
HIGH: The TALLY indicator brightness is high.
OFF: The TALLY indicator is disabled.
LOW: The TALLY indicator brightness is low.
d BACK TALLY indicator
When the BACK TALLY switch is set to ON, this indicator
has the same function as the TALLY indicator.
e BACK TALLY switch
This switch enables or disables the BACK TALLY and
REAR TALLY indicators.
ON: The BACK TALLY and REAR TALLY indicators are
enabled.
OFF: The BACK TALLY and REAR TALLY indicators
are disabled.
f LIGHT switch
This switch turns on/off the display panel light.
a TALLY indicator
b DISPLAY switch
c TALLY switch
d BACK TALLY indicator
e BACK TALLY switch
i REAR TALLY indicator
h Display panel
g WARNING indicator
f LIGHT switch
Note