Filter
Top Products
88
Adjustments and Settings from Menus
Chapter 5 Menu Displays and Detailed Settings
4
Set the WHITE BAL switch to the position
corresponding to the desired channel (A or B).
If the WHITE BAL switch is not set to A or B when
you operate the camcorder, the adjustment value will
not be reflected in the output signal.
5
Turn the MENU knob to move the b mark to the item
you want to set, and press MENU knob.
The
b mark on the left of the selected item changes to
a z mark, and the z mark on the left of the setting
changes to a ? mark.
6
Turn the MENU knob to change the setting, and press
the MENU knob.
The z mark returns to a
b mark, and the ? mark
returns to a z mark.
To set other items, go back to step 3.
To set the other white balance channel, go back to step
2.
7
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
When using the OFFSET WHITE function, “+” is
displayed as the WARM color temperature indication and
“-” is displayed as the COOL temperature indication in the
viewfinder.
5-3-5 Assigning Functions to
Assignable Switches
You can assign the desired function to the ASSIGN 1/2
switches and the TURBO GAIN button.
Proceed as follows:
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the
viewfinder screen.
2
Turn the MENU knob until the FUNCTION 1 page
appears, then press the MENU knob to select to page.
The current settings of each item appears on the right
of the item.
FUNCTION 1 page
3
Turn the MENU knob to move the b mark to the item
corresponding to the switch to which you want to
assign the function, and press the MENU knob.
The corresponding ASSIGN SEL window appears.
ASSIGN <1> SEL window
COLOR FINE
<A>
Adjusts the value more precisely if the
adjustment by WARM-COOL <A> is
not satisfactory.
OFFSET
WHITE <B>
Turns the setting of the offset for
channel B ON or OFF. ON: Adds the
offset adjusted on this page to the
white balance.
WARM-COOL
<B>
Sets the offset for the white balance
of channel B, using the color
temperature. Adjust the value while
looking at the real image because
error tends to be bigger for
adjustment of high color temperature.
COLOR FINE
<B>
Adjusts the value more precisely if the
adjustment by WARM-COOL <B> is
not satisfactory.
Note
Note
Item Description
Item Description
ASSIGN SW <1> Assigns the function to ASSIGN 1
(push-type) switch.
ASSIGN SW <2> Assigns the function to ASSIGN 2
(slide-type) switch.
TURBO SW Assigns the function to the TURBO
GAIN button.
CACHE/INTVAL REC
TURBO SW TURBO
U03
ASSIGN <1> SEL ESC
OFF
PICTURE CACHE ON/OFF
TEST OUT CHARACTER
MARKER
RE-TAKE
ATW
RETURN VIDEO
LENS RET
REC SWITCH
TURBO SWITCH