Filter
Top Products
40
COLOR CORRCT (Continued)
z Tips
• Setting both memories to the same setting doubles the color correction effect.
• The settings of [COLOR CORRCT] will be retained even if the power is turned off. However, if you want
to correct colors that may change according to time of the day, weather, location, etc., it is recommended
that you set [COLOR CORRCT] again prior to recording.
• If you change the white balance value or the settings of [WB SHIFT], [COLOR LEVEL] or [COLOR
PHASE] of the picture profile, the settings of [RANGE] and [PHASE] of the selected memory will
change. When you change the white balance value or the settings of the above picture profile items after
you have set [RANGE] and [PHASE], check the settings of [COLOR CORRCT] prior to recording.
• During the automatic white balance adjustment, the white balance value automatically varies according to
the lighting conditions of your recording environment. The manual white balance adjustment is
recommended when you use [COLOR CORRCT].
Item Description and settings
[MEM1 COLOR] Sets colors stored in Memory 1.
[PHASE] : Sets color phase.
0 (purple) t 8 (red) t 16 (yellow) t
24 (green) t 31 (blue)
[RANGE] : Sets color phase range.
0 (no color selection), 1 (narrow: to select only a
single color) to 31 (wide: to select multiple colors
in similar color phase)
[SATURATION] : Sets saturation.
0 (to select from light colors to dark colors) to 31
(to select dark color)
[ONE PUSH SET]: Automatically sets [PHASE] for a subject at the
center of the marker. [SATURATION] is set to 0.
[MEM1 REVISN] Corrects colors in Memory 1.
[R GAIN] : Corrects the redness of the color in Memory 1.
Tone of cyan becomes higher as the redness decreases.
-15 (less reddish) to +15 (more reddish)
0 for no correction
[B GAIN] : Corrects the blueness of the color in Memory 1.
Tone of yellow becomes higher as the blueness
decreases.
-15 (less bluish) to +15 (more bluish)
0 for no correction
[MEM2 COLOR] Sets colors stored in Memory 2.
See [MEM1 COLOR] for description and settings.
[MEM2 REVISN] Corrects colors in Memory 2.
See [MEM1 REVISN] for description and settings.
Changing the settings of your camcorder recordings (Continued)