Filter
Top Products
47
Recording/Playback
4 Select the function that you want
to assign with the SEL/PUSH
EXEC dial A.
5 Select [OK] with the SEL/PUSH
EXEC dial A.
6 Select [ RETURN] with the SEL/
PUSH EXEC dial A.
7 Press the MENU button B to hide
the menu screen.
z Tips
• Shot transition is assigned to the ASSIGN
4, 5 and 6 buttons (p. 48). Cancel the shot
transition assignment to return to the pre-
setting assignment.
• To cancel the shot transition, select
[SHOT TRANSITION] t [YES] in step
3.
If you record a scene with an index signal,
you can easily find that scene during
playback (p. 56).
The index function will make it easier to
check the transition of recording or edit
your pictures using index signals.
1 Assign [INDEX MARK] to one of
the ASSIGN buttons (p. 46).
2 Press the ASSIGN button to
which [INDEX MARK] is assigned.
During recording
appears for about 7 seconds and an
index signal is recorded.
During standby
flashes.
After you press the REC START/STOP
button to start recording, appears
for about 7 seconds and an index signal
is recorded.
To cancel the operation
Press the ASSIGN button to which [INDEX
MARK] is assigned again before you start
recording.
b Notes
• You cannot record an index signal on a recorded
tape afterward.
Recording an index signal
Continued ,