Filter
Top Products
86
[PROGRESSIVE]. The default setting is
[INTERLACE].
x SCAN TYPE
You can select a scan type for recording in
HDV format.
B60
Captures 60 fields per second in an
interlace scan.
24
Captures 24 frames per second.
24A
Captures 24 frames per second.
The phase of the 60i conversion is reset
each time recording starts.
30
Captures 30 frames per second.
b Notes
• Selectable [SCAN TYPE] settings differ
depending on the setting of [REC TYPE].
– [INTERLACE]: [60], [24], [24A], [30]
– [PROGRESSIVE]: [24], [30]
• You can only play back a tape recorded with the
[REC TYPE] set to [PROGRESSIVE] on a
device that supports playback of a tape recoded
by progressive scanning.
• When recording in HDV format in [24A] mode,
the time code does not progress correctly from
scene to scene.
When playing back those movies, a momentary
pause will occur between scenes. In this case,
you can copy the movies without the pause from
your camcorder to a computer via an i.LINK
cable and use them on the computer as normal
movies.
• When [REC TYPE] is set to [PROGRESSIVE]
and [SCAN TYPE] to [24], movies and time
codes are recorded at 24 frames per second and
indicators are displayed at 30 frames per second.
When using the HDV/DV jack, the recorded
signal is outputted at the following frame rate
depending on the setting of (IN/OUT
REC) menu t [i.LINK SET] t [HDV t DV
CONV]:
[OFF]: 24 frames per second
[ON]: 30 frames per second
When using other jacks, the recorded signal is
outputted at 30 frames per second.
x SCAN TYPE
You can select a scan type for recording in
DVCAM/DV format.
B60
Captures 60 fields per second in an
interlace scan.
24
Captures 24 frames per second.
30
Captures 30 frames per second.
This function is available only when you set
[REC FORMAT] to [DV].
BDVCAM ( )
Records in the DVCAM format.
DV SP ( )
Records in the SP (Standard Play) mode of
the DV format to record for a longer time
than in the DVCAM format.
b Notes
• Mosaic-like disturbance or audio interruption
may occur when you play back a movie
recorded in the DV SP mode by another device.
• Image may be distorted or time code may not be
properly connected between the scenes recorded
in the DVCAM mode and DV SP mode.
You can record a movie in an aspect ratio
that matches that of a TV that you want to
connect. Refer also to the instruction
manuals that come with the TV.
BON
Records a movie in an aspect ratio that
matches the full screen of a 16:9 (wide)
TV.
DV PROGRE.
DV REC MODE (DV Recording
mode)
DV WIDE REC
Press the MENU button t select the (IN/OUT REC) with the SEL/PUSH EXEC dial.