Filter
Top Products
operates after 10 seconds.
[59] How to Use Using shooting functions Selecting a drive mode (Continuous
shooting/Self-timer)
Cont. Bracket
Shoots multiple images while automatically shifting the exposure from base to darker and then
to lighter. Press and hold down the shutter button until the bracket recording is completed.
You can select an image that suits your intention, after recording.
1. MENU → (Camera Settings) → [Drive Mode] → [Cont. Bracket]
2. Select the desired mode using the right/left button on the control button.
Menu item details
Cont. Bracket: 0.3EV 3 Image (default setting):
This setting shoots three images continuously with an exposure value shifted by plus or minus
0.3 EV.
Cont. Bracket: 0.7EV 3 Image:
This setting shoots three images continuously with an exposure value shifted by plus or minus
0.7 EV.
Cont. Bracket: 1.0EV 3 Image:
This setting shoots three images continuously with an exposure value shifted by plus or minus
1.0 EV.
Note
The last shot is shown on the Auto Review.
In [Manual Exposure], the exposure is shifted by adjusting the shutter speed.
When you adjust the exposure, the exposure is shifted based on the compensated value.
When the flash is used, the product performs flash bracket shooting, which shifts the amount
of flash light even if [Cont. Bracket] is selected. Press the shutter button for each image.
[60] How to Use
Using shooting functions Selecting a drive mode (Continuous
shooting/Self-timer)
WB bracket